Fully modulating, condensing central heating boiler to meet latest heating regulations SEBUK “A”.
OpenTherm is the name of a non-manufacturer-dependent system of communication between the
central heating boiler and room thermostats. The system consists of a communication protocol and
an interface specification. OpenTherm combines simple installation techniques with high functionality
and future expansion possibilities.
Weather compensation will enhance comfort and fuel efficiency.
This technology varies the heat output of the boiler according to the outdoor temperature,
thus ensuring that the boiler doesn't use too much gas. Energy is saved by ensuring that
maximum boiler output is hardly ever used.
2 stage frost protection to the boiler and central heating system.
24 lpm raised to 33°C or up to 960 l/hr raised to 50°C.
Never runs out of hot water (storage will run out and takes 27 minutes to heat up).
Energy efficient – only heats water that is used.
Digital temperature control to 1°C (Not available with storage).
Instantaneous water heating, therefore no standing losses that are typical of storage water
heaters (heat loss is approx 1.9 kW/24 hr or 693.5 kW per annum).
Very compact design H 600mm x W 470mm x D 220mm
(each storage water heater is D 554mm x H 1499mm).
Frost protected water heater.
No G3 plumbing required saving labour, materials and time.