Condensing Water Heaters -
Flues and Accessories

Standard horizontal flue kit

For use where installations terminate horizontally. Contents: 80/125mm Wall Terminal (950mm), 87° Bend, White Wall Gasket, Black Wall Gasket,
Code: 952 - 220 - 001

Vertical flue terminal

For use where installations terminate vertically. Contents: 80/125mm Roof
Terminal (950mm) Code: 952 - 220 - 007

Additional parts for the flue system

250mm Flue Extension

Code 952 - 220 - 004

500mm Flue Extension

Code 952 - 220 - 005

1000mm Flue Extension

Code 952 - 220 - 006

87° Bend

Code 952 - 220 - 003

45° Bend

Code 952 - 220 - 002

Roof Attic Pipe Clamp (125mm)

Code 952 - 026 - 010

Standoff Pipe Clip (125mm)

Code 952 - 026 - 012

Flat Roof Flashing (125mm)

Code 952 - 026 - 008

Pitched Roof Flashing 5° - 25° (125mm)

Code 952 - 026 - 017

Pitched Roof Flashing 25° - 45° (125mm)

Code 952 - 026 - 011

Pitched Roof Flashing 35° - 55° (125mm)

Code 952 - 026 - 018

Condensate Disposal

Rinnai HDC units may generate condensate at a rate of up to 5 litres per hour, as a by-product of their highly efficient heat recovery.

This condensate must be drained via a pipe to a suitable point of discharge.

The condensate is mildly acidic and therefore copper tube and fittings must not be used as they will corrode. Instead, Rinnai recommend plastic pipes and fittings, such as Unplasticised Polyvinyl Chloride (UPVC) or Polyethylene (PE) which is commonly used for irrigation piping.

Note: Rinnai recommends that the acidic condensate is neutralised prior to discharging to waste.
For more details please telephone 01928 531870.

Products

Condensing Water Heaters - Flues and Accessories

Standard horizontal flue kit

Vertical flue terminal

Additional parts for the flue system

Condensate Disposal

Condensing Water Heaters -
Flues and Accessories