Tankless 16i - 35kW Domestic Multipoint Water Heater
Rinnai Multipoint Tankless 16i Internal Water Heater
"100% accurate water temperature control"
Sudden changes in water temperature, causing cold showers or scalding hot baths are a thing of the past with Rinnai's Multipoint Tankless 16i water heater.
Unlike many competitors, the water temperature you set is the water temperature you get. So, if you are showering at, say 42°C, and someone turns on a tap elsewhere in the house, the temperature will not vary.
"IPx4 rated, can be mounted in zone 2 within bathrooms"
Rinnai Multipoint Tankless 16i is the perfect solution to hot water requirements for domestic properties/dwellings and light commercial use. It is designed to allow maximum flexibility when choosing where to install it, as it does not have to be mounted on an external wall. The Rinnai Multipoint Tankless 16i is designed for use directly off the mains and therefore there is no need for large, ungainly storage vessels.
W16i-NAT : Natural Gas Water Heater
W16i-LPG : LPG Water Heater
DownloadsAncillaries Domestic Multipoint Brochure 16i Multipoint Eco Label 16i Multipoint Product Fiche
|Installation||Internal wall mounted|
|Exhaust system||Room sealed|
|Temperature range||35°C - 75°C|
|Ignition method||Direct electronic|
|Hot water delivery capacity||16 ltr/min raise 25°C|
|Min operating water flow||2.4 ltr/min|
|Nominal operating pressure||1 - 7 bar|
|Power supply||230V AC 50Hz 1ph|