Infinity Solo Light Commercial Hot Water Storage System
Rinnai has revolutionised the way hot water has been supplied ever since we launched the first fully electronically-controlled gas continuous flow hot water system. The infinity series always deliver a continual flow of hot water for our customers needs and has been hugely succesful.
The infinity series now has a line-up, Infinity Solo, in addition to the existing product range, designed to be the ideal hot water system for Light Commercial requirements, where services may limit the use of continuous flow hot water system.
Rinnai's Infinity Solo is a highly efficient Heavy Duty continuous flow water heater with a heavily insulated stainless steel storage cylinder. The combination of continuous flow water heaters with a storage cylinder allows for short periods of peak hot water use.
The Infinity Solo can be used for not only the Direct to Outlet system, but also Secondary Return system that distribute the hot water around a building. Infinity Solo will deliver a constant output temperature of 60°C, satisfying requirements for the prevention of legionella.
- Stainless steel cylinder with high termal efficiency and Ultra Low standing heat loss
- Highly efficient continuous flow water heater is used as the heating booster
- Rinnai Patented Lean-rich Low NOx burner (Solo20 & Solo32 only)
- Compatible with Renewable heating source through the renewable pipe in the cylinder (Solo20 & Solo32 only)
- Industry leading higher modulating ratio
- Compact design for the limited space
- Inbuilt lime scale detector
- Inbuilt immersion heater for the emergency backup
- Easy fault diagnostics via Status monitor
- 10 years cylinder warranty (subject to terms & conditions)
DownloadsInfinity Solo 16 Specification Infinity Solo 20 Specification Infinity Solo 32 Specification Infinity Solo Range Brochure
|Input Gross Hs||Max||34.9kW||36.7kW||59.5kW|
|Input Gross Hi||Max||31.4kW||33.0kW||53.6kW|
|Gas Consumption||Natural Gas (G20)||3.3m³/h||3.5m³/h||5.7m³/h|
|Max Flow Rate||∆T50°C||680 ltrs/h||800 ltrs/h||1262 ltrs/h|
|∆T50°C||8 ltrs/min||10 ltrs/min||16 ltrs/min|
|Continuous Flow Rate||∆T50°C||480 ltrs/h||600 ltrs/h||962 ltrs/h|
|Storage Recovery Time||∆T50°C||25 Mins||20 Mins||19 Mins|
|Standby Heat Loss||kWh||1.5||1.8||2.3|
|Nominal Operating Water Pressure||bar||3|
|Maximum Water Pressure||bar||10|
|Minimum Water Pressure||bar||1|
|Maximum Setting Temperature||°C||75°C||85°C|
|Max Flue Run (Concentric)||m||7||15|
|Cold Inlet Connection||BSP||1"|
|Hot Outlet Connection||BSP||1"|
|Gas Connection Diameter||BSP||¾"|
|Capacity||170 L||200 L||300 L|